car diagnostic scanner

Dobrodošli na moj blog

21.05.2019.

How to update Nexiq firmware with John Deere SA

When I was doing experiments with my Nexiq clone (also called Xtruck) and John Deere Service Advisor(JDSA)…

Running the utility binload from the folder C:NexiqTest.
Set checkbox – Enable automatic USB-Link firmware upgrade
and get firmware bin file.
Save original bin with other name (for recovery).

I copy the firmware bin from the program John Deere SA,
rename as original Nexiq bin name
and replace original – by that file.

Next, again start utility binload from the folder C:NexiqTest
and have John Deere SA firmware in Nexiq.

I have test connection with 2CAN pin and read engine serial
but i don’t run program…
I could not do normal work program…

JDL adapter like Nexiq adapter…
In Nexiq new driver have new firmware version
I always update firmware and do not have problem…
Credits to Dmitry in the MH community

21.05.2019.

SUPER DP5 dirgprog 5 Full Version OBDII Diagnosis/Key Programmer/Mileage correction/Special function

SUPER DP5 dirgprog 5 Full Version OBDII Diagnosis/Key Programmer/Mileage correction/Special function

Highlight:

Full Version SUPER DP5 dirgprog 5 support OBDII Diagnosis +Immobilizer+Mileage correction+Diagnosis+Special function (Oil rest +ABS+Battery matching+ECU programming+EPB+Throttle programming+Airbag rest+TPMS+Steering angle rest+OBDII+DPF+Injector code+Supension matching+Gear learning+CVT learning

SUPER DP5 dirgprog is a new Android-based vehicle trouble diagnostic device developed . and it is characterized by covering wide range of vehicles, featuring powerful function, and providing precise result.

SUPER DP5 Package Full Version Functions:

Immobilizer+Mileage correction+Diagnosis+Special function (Oil rest +ABS+Battery matching+ECU programming+EPB+Throttle programming+Airbag rest+TPMS+Steering angle rest+OBDII+DPF+Injector code+Supension matching+Gear learning+CVT learning

SUPER DP5 Software Features:

mmobilizer / Remote programming

European cars

VW/Audi/Skoda/Seat (Standard)

VW/Audi/Skoda/Seat (Advanced) add NEC 24C64 2014-key programming.

BMW (Standard)

BMW (Advanced) Add FEM/BDC key programming, ISN code reading etc.

Volvo

The other European cars

Asian cars Hyundai /Kia (Standard)

Hyundai /Kia (Advanced) Add 47/8A/46 smart key pin code reading

Toyota /Lexus (Standard)

Toyota /Lexus (Advanced) For Middle east cars, it adds H chip all keys lost (Immo box reset)

The Asian cars

North American cars Ford(Standard)

Ford (Advanced) Add Ford after 2015 key programming functions, I.E: Mobdeo,Edge,Taurus,Escort,EVEREST,Explorer,F-150 SVT Raptor,Mustang,Lincoln MKZ, MKC and Continental 2015 – etc.

GM(Standard)

GM(Advanced)

The other American & Chinese cars Can perform BMC pin code reaing on these cars: -2017 Lacrosse,Lacrosse, Trax,Envision, GL8,MALIBU,AVEO,Excelle before 2015,Cruze etc.
18.1

14.05.2019.

John Deere Service Advisor with Nexiq clone 90% Worked

FYI, John Deere Service Advisor 90% works with Nexiq China clone.

Topic 1: John deere SA possible with NEXIQ USB Link?

It is possible to install Professional Diagnostic Tools John Deere Service Advisor on your laptop, though the installation is really complicated. If you have a Lenovo Thinkpad laptop, the easiest way is to restore the main partition from the image of my computers’ c: drive. And every time i change my laptop, i just restore it.

Win7 installed and fully updated. It takes hours.

The image will not work on XP, but SA works fine. My suggestion, buy used Lenovo T400 or T500. it’s more or less 250 EURO in Europe. Install windows 7 and then can put my image. Takes 10 minutes and u have SA working.

Topic 2: How to get Nexiq china worked?
I spent a month doing research on this and i managed my Heavy Duty Truck Scan Tool Nexiq to work 90%. The thing is that Nexiq has only 2 channels while EDL has 3. The 3rd one is Powertrain and it is used very seldom. E.g. I reprogrammed all the controllers on 6690 premium except two, but found a way around it opening the pld file with pld editor and changing Powertrain channel to Vehicle (channel 1). Lots of machines don’t even have a 3rd Powetrain channel. Like all 5R; 6115R, 6125R, 7280R….. From my experience only the older machines have it and still can be programmed most of the time. Programming controllers is easy, but diagnostics is a bit annoying. Every time you establish the connection u have to remove the USB plug and plug it again for the readings to appear. Connection establishment is taking a long long time and you never see the ECU. Only all the other controllers. So all the time something doesn’t work. If you are prepared for this here is what you have to do:

a) Rewire the the cables as shown in the picture in my post here:
I switched places channel 1 with channel 2 (see the pic) with my Chinese version and now it works fine, probably it was possible to do it adjusting the software settings as mentioned above, but i tried a lot, and nothing helped. Now i can connect, tried with 6125R and 5070M. Works fine!!! Except one very important thingy. After i establish the connection, all the reading give the same meaningless number. Then, I discovered accidentally, I pull out the USB cable, get the message “Connection interrupted” I put it back in, get the message “Connection resumed” and wuolla, all the readings show up immediately.

b) You don’t have to change the firmware. Both will work pretty much the same but with different issues.

P.S. For diagnostics only, there is a subprogram of SA that works without any cable rewiring, it doesn’t have a Program Controller option, and you still need to reinsert the usb after connection has been established. You just need to select the right port (which is usually 1939ImplementAutoboud or 1939AppAutoboud depending on the machine) and model. If you have SA, you will find the software at c:Program FilesService ADVISORxvdsXJDET.exe

Just to let you know, after a year working like that, i bought another EDL (recommended by a folk in the forum, much much much more than the old one)
So much relief

14.05.2019.

BMW ICOM Next vs BMW ICOM A2 ,which better ?

BMW ICOM Next A+B+C and ICOM A2 are two popular Diagnostic and Programming Tool for BMW,MINI,Rolls-Royce BMW-Models.Then Buy BMW ICOM Next or buy BMW ICOM A,which one better ? Today, Autonumen.com blog will share a comparison between BMW ICOM Next and BMW ICOM A2 +B+C to help customers better pick up right tools.

About BMW diagnostic tool BMW ICOM Next

2017 BMW ICOM Next is the latest generation diagnostic head for MW,MINI,Rolls-Royce BMW-Model,which also was the updated version of ICOM A2,inherited all features of BMW ICOM A2,but at the same time,also made some changes and added new features,see striking features below

1. Gbit workshop LAN,backwards compatible
2. Preparation for Gbit LAN on vehicle OBD(cars do not yet supportthis and interface not yet defined,ICOM Next hardware adaptation will be necessary for future Gbit car interface,will cause adaptation costs)
3. Faster start-up times and high throughput
4. Through high-performance,low-power ARM SoC
5. Improved handling
6. More flexible OBD cable
7. Lighted button for logs etc

About New BMW ICOM A2

BMW ICOM A2 Supports BMW and MINI vehicles from old to latest 2015 and currently,BMW ICOM A2 is the best BMW ICOM.
15.1
15.2

BMW ICOM Next vs BMW ICOM A2

The Same

1.For BMW Models.
2.Multi-Languages Supported.
3.work with same software ISTA-D ISTA-P for the same BMW Vehicles.
4.great performance and affordable price.

The Different

1. Different Outlook Design
15.3
As we have seen above, the ICOM Next with new look,it is with black and white color.

2.Hardware and function : These two BMW tools shared same software,yet,different firmware adaption. BMW ICOM Next A with better PCB board.

3.BMW ICOM NEXT A +B + C is the improved version of BMW ICOM A2,Functionally compatible to ICOM A2,but with more stable during programming and faster start-up times and high throughput.

4.Connection methods : BMW ICOM NEXT Diagnostic interface cant support wireless,it is only USB connection way,while the ICOM A2 supports wifi,the package contains a wifi adapter.

5. ICOM A2 With HDD,yet,the BMW ICOM Next didnt come with. So, for BMW ICOM Users,you need to install software separatly.

So,if you are looking for a BMW ICOM with WIFI connection and HDD with installed software,then buy BMW ICOM A2 will be your choice, it is the best ICOM with WIFI function. Otherwise,i will recommend you buy BMW ICOM Next, after all,it is the newest geneartion with all features of ICOM A2,yet,at the same time,it made some improvments and will give you a better experience and the price is cheap affordable too.

Focus On OBD Tool Since 2008

Wechat/WhatsApp:(+86)15815514521

Email:service@autonumen.com

Website:www.autonumen.com

08.05.2019.

Porsche PIWIS III with V37.250.020 Piwis 3 Software Update New Feature

Porsche Piwis tester 3 PT3G VCI with V37.250.020 Piwis 3 Software unlimited license installed on Full new Panasonic CF-54 laptop ready to use new release for Piwis III diagnostics and with Porsche PPN subscription for Porsche Online  programming. What’s the Feature of Piwis III? Why Choose Piwis 3 with V37.250.020 Porsche Piwis Tester III software? Autonumen.com share PIWIS tester III PT3G VCI Feature as following.

Porsche PIWIS Tester III With V37.250.020 Piwis 3 software Installed Full New PANASONIC CF54 Laptop  Ready To Use

19.1
PIWIS 3 Porsche VCI3 Porsche PIWIS Tester III with Panasonic CF 54 Porsche PIWIS III with V37.250.020 Piwis 3 Software Update New Feature

Original Porsche Piwis Tester II Features:

Faster Performance:

Piwis 3 compare with Porsche Piwis II, more faster and stable connection Simulation mode (diagnostic session without VCI connection)

Porsche Tester III more convenient for working:

Porsche Piwis Tester 3 Wired USB connection compare with Porsche Piwis II, Piwis 3 tiny size support wifi connection as advantages for workshop using

Support More New Car Model:

Porsche Piwis 3 PT3G VCI compare with Piwis II work for new model: Panamera G2, Cayenne E3, and Porsche cars after 2017 till 2018.  Autonumen.com have Porsche Piwis III PT3G VCI with V37.250.020 Porsche Piwis 3 software Features unlimited license.

Porsche PIWIS Tester III Software Unlimited License:

V37.250.020 Porsche Piwis Tester III software with unlimited license, work all the times, Professional Diagnostic Tool Porsche piwis tester III End-user capable DVD update

PIWIS Tester III VCI Cover full Piwis II functions:

Porsche Piwis Tester III work for  Diagnostics, General ECU diagnostics (DTC read/clear), ECU programming/coding, Real-time control parameters display & Electrical schematics mapping etc.

——Fault finding Guided

——Immobilizer-DPA Cayenne Diesel

——Wiring Diagrams

PIWIS 3 Porsche VCI3 Porsche PIWIS Tester III with Panasonic CF 54 Porsche PIWIS III with V37.250.020 Piwis 3 Software Update New Feature

19.2

Piwis 3 from Autonumen.com is the third-generation Porsche diagnostic tool Porsche Piwis Tester III, it’s improve to the modern user interface, easy to carry for working, faster performance.

Porsche Piwis III Update New: license automatic update, online view of the technical documents, fault finding guide, online programming, faster and more efficient work.

Need Original Porsche Piwis III with V37.250.020 Piwis 3 Software Unlimited License just contact us freely.

07.05.2019.

2015A CAT ET 3 CAT Caterpillar ET diagnostic cat et III Functions

Real 2015A Caterpillar ET3 Adapter III P/N 317-7485 Professional Diagnostic Adapter for CAT with WIFI.CAT Caterpillar ET Diagnostic Adapter display status of all parameters, such as engine speed, Throttle position, timing advance, fuel flow, etc.CAT Caterpillar ET Wireless Diagnostic Adapter V2015 CAT Caterpillar ET III Diagnostic tool retrieve engine totals for fuel used, miles traveled, and hours Operated.

8.1

2015A Wifi Cat Caterpillar ET adapter iii functions:
1. Allows communication between service tools and engine controls using various data links such as J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;
2. Flash program allows adapter firmware upgrades as additional features become available;
3. Uses J1939/11, high-speed data link (part of ADEM III controls), substantially reducing flash times;
4. Automatically selects J1939/11 when flashing the engine (reduces the flash time approximately 80%, from 14 minutes to 3 minutes).

Software Version: Caterpillar et 2015a (Package with no 2015A cat et key generator, customers need send information for factory to activation, thanks!!)

8.2

Operating System: Designed to run with Microsoft Windows XP or windows7 32bits

Recommended Configurations:

PC containing a 2.0 GHz dual-core processor
3GB RAM
3GB of available hard disk drive
DVD-ROM drive
15.4 inch XGA Screen (1280×1024 compatible)
Microsoft Windows™ 7 Professional
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)

8.3

USB 1.1 or 2.0 port (for use with Comm Adapter 3)
Ethernet RJ45 connector
Built in pointing device or mouse
For security purposes, Microsoft Internet Explorer version 9 or newer is recommended.
Note: The most recent version of Microsoft Internet Explorer may not be validated to work with the service tool.

CAT ET III Wireless Adapter 3 PCB Board Display:

8.4

Focus On OBD Tool Since 2008

Wechat/WhatsApp:(+86)15815514521

Email:service@autonumen.com

Website:www.autonumen.com

30.04.2019.

Compare Autel MaxiSys MS906TS with MS 906BT with MS906

MS906 has the same apperance with MS906BT, but MS906BT has a few advantage than MS906:

1. MS906BT is installed Bluetooth, allowing diagnosis wirelessly.

2. MS906BT’s diagnostic coverage includes premium vehicle brands such as Maserati and Bentley, which would be required for high-end service shops.

3. MS906BT supports oscilloscope and digital inspection camera add-ons which are not supported by MS906.

4. Finally, MS906BT has the capability to perform coding for covered vehicles.

MS906TS is added TPMS function based on MS906BT.

Autel MaxiSys MS 906TS VS MS 906BT VS MS906
9.1
9.2
9.3
We have other Autel diagnostic tool,exmple for Autel Maxisys Elite,Autel Maxisys MS908S PRO,Autel MaxiSYS CV,AUTEL MaxiDAS DS808 KIT,welcome to contact us,our email is service@autonumen.com

25.04.2019.

John Deere Service Advisor with Nexiq clone 90% Worked

FYI, John Deere Service Advisor 90% works with Nexiq China clone.

Topic 1: John deere SA possible with NEXIQ USB Link?

It is possible to install Professional Diagnostic Tools John Deere Service Advisor on your laptop, though the installation is really complicated. If you have a Lenovo Thinkpad laptop, the easiest way is to restore the main partition from the image of my computers’ c: drive. And every time i change my laptop, i just restore it.

Win7 installed and fully updated. It takes hours.

The image will not work on XP, but SA works fine. My suggestion, buy used Lenovo T400 or T500. it’s more or less 250 EURO in Europe. Install windows 7 and then can put my image. Takes 10 minutes and u have SA working.

Topic 2: How to get Nexiq china worked?
I spent a month doing research on this and i managed my Heavy Duty Truck Scan Tool Nexiq to work 90%. The thing is that Nexiq has only 2 channels while EDL has 3. The 3rd one is Powertrain and it is used very seldom. E.g. I reprogrammed all the controllers on 6690 premium except two, but found a way around it opening the pld file with pld editor and changing Powertrain channel to Vehicle (channel 1). Lots of machines don’t even have a 3rd Powetrain channel. Like all 5R; 6115R, 6125R, 7280R….. From my experience only the older machines have it and still can be programmed most of the time. Programming controllers is easy, but diagnostics is a bit annoying. Every time you establish the connection u have to remove the USB plug and plug it again for the readings to appear. Connection establishment is taking a long long time and you never see the ECU. Only all the other controllers. So all the time something doesn’t work. If you are prepared for this here is what you have to do:

a) Rewire the the cables as shown in the picture in my post here:
I switched places channel 1 with channel 2 (see the pic) with my Chinese version and now it works fine, probably it was possible to do it adjusting the software settings as mentioned above, but i tried a lot, and nothing helped. Now i can connect, tried with 6125R and 5070M. Works fine!!! Except one very important thingy. After i establish the connection, all the reading give the same meaningless number. Then, I discovered accidentally, I pull out the USB cable, get the message “Connection interrupted” I put it back in, get the message “Connection resumed” and wuolla, all the readings show up immediately.

b) You don’t have to change the firmware. Both will work pretty much the same but with different issues.

P.S. For diagnostics only, there is a subprogram of SA that works without any cable rewiring, it doesn’t have a Program Controller option, and you still need to reinsert the usb after connection has been established. You just need to select the right port (which is usually 1939ImplementAutoboud or 1939AppAutoboud depending on the machine) and model. If you have SA, you will find the software at c:Program FilesService ADVISORxvdsXJDET.exe

Just to let you know, after a year working like that, i bought another EDL (recommended by a folk in the forum, much much much more than the old one)
So much relief

24.04.2019.

CAT ET Adapter iii caterpillar communication adapter three Technical Inquiries

Caterpillar ET3 Adapter III is pc-based heavy duty diagnostic tool for caterpillar engines. Nowadays, caterpillar communication adapter three comes with Auto Repair Software CAT ET 3 2015A software program. autonumen.COM also has the CAT SIS 2016 software hdd offered.

In case you wanna know even more about cat caterpillar et adapter three, please you’ll be able to read some technical inquiries that other people met. Now, we’ll get the summary of cat caterpillar et diagnostic adapter faqs. Hope that can enable you to.

CAT ET III Adapter on www.autonumen.com FAQs:

1. Q: hello friends could allow ET 2014A, I am looking to use nexiq, so I get error Plz enable me

Answer:before any procedure, you must set up the driver nexiq, under the ET2014, and the preferences window and locate the connection utility, under use the mechanism approved RP1210, stick with the solution to click Sophisticated and choose USB link Nexiq, end click OK, and that’s it!

2. Q: When open ET I get the message

Answer:There are lots of mistakes that we can uncover after you set up this patch, typically suggest redo the installation, delete the atmosphere variable, paste one particular by 1 the files, go back to adjust the mac address with a file or procedure we lack provides this error.

3. Q: 2014ET is working very good on Computer.But SIS is want activation,what I desire for run SIS,which version have to have SIS for lisance.dat ??

Answer:Run all as administrator

4. Q: Connected laptop with win XP, 2011B and worked completely! Attempted to reactivate 2014A on win 7 laptop utilizing the patch from edmtech running as administrator and it mentioned the MAC address adjust was productive however it goes back to what it was when I close it and ET says it’s not licensed. Any concepts?

Answer:you should modify the mac address for pci express due to the fact with other mac address not perform.

5. Q: Set up Cat ET 2014A at ASUS apply windows 8.1,but Error when Cat Network Activation ID, adapter use Realtek PCIe FE Loved ones controller of Cat network Activation ID

Answer:run as administrator Cat Network id.

When you’ve got other questions about caterpillar et three adapter, please really feel no cost to contact autonumen.com team, then you definitely will get the ideal offer and service.

17.04.2019.

BMW ICOM NEXT A+B+C 2016 New Generation OF ICOM A2 with V2016.07 ICOM HDD Win7 System Installed on Dell D630 Laptop 4GB

14.1

BMW ICOM NEXT A Latest Generation Diagnostic Head For BMW, MINI, Rolls-Royce BMW-Model.
Can Replace BMW ICOM A2, including all function of ICOM A2.
We provide this package offer to install latest BMW ICOM HDD on the Dell D630 laptop for you ready to use

14.2

Improved Functionality and Performance:
1. Gbit workshop LAN, backwards compatible
2. Preparation for Gbit LAN on vehicle OBD(cars do not yet supportthis and interface not
yet defined,ICOM Next hardware adaptation will be necessary for future Gbit car
interface,will cause adaptation costs)
3. Faster start-up times and high throughput
4. Through high-performance,low-power ARM SoC
5. Improved handling
6. More flexible OBD cable
7. Lighted button for logs etc

ICOM NEXT A+B+C Diadnostic Head Overview?
Functionally compatible to ICOM A2
Mechanical design similar ICOM A2
Backwards compatible to car adapters (ICOM B, C) and motorcycle adapters (ICOM D, E)

ICOM NEXT ABC Specifications:
Zeroization of data on tamper detection
Secure supply chain assurance
Key storage using physically un-clonable function
CRI Pass-Through DPA Patent Portfolio
Advanced cryptographic Services

This is from Autonume.com, BMW ICOM NEXT A+B+C 2016 New Generation OF ICOM A2 with V2016.07 ICOM HDD Win7 System Installed on Dell D630 Laptop 4GB


Stariji postovi

<< 05/2019 >>
nedponutosricetpetsub
01020304
05060708091011
12131415161718
19202122232425
262728293031

MOJI LINKOVI

MOJI FAVORITI
-

BROJAČ POSJETA
7399

Powered by Blogger.ba